Bailout test, HYDRUS‐2D, and analytical modeling for estimating permeability of ephemeral stream bed

Abstract

Abstract Accurate estimation of effective saturated hydraulic conductivity (Ksat) of a vadose zone with an underlying shallow perched aquifer is challenging. Standard pumping tests and double‐ring infiltrometers are unsuitable for this purpose. Therefore, a bailout test (BOT) was conducted in nine soil pits to evaluate the hydraulic properties of the vadose zone and the subjacent shallow‐perched aquifer in a porous bed of a wadi in Oman. The analytical (Kirkham's type) and numerical (HYDRUS‐2D) models were also used. Upon instantaneous emptying, the water level rises in a pit, owing to seepage from the ambient shallow aquifer. The draw up was monitored and compared with modeling, which assumes a homogeneous or layered van Genuchten's soil. The soils of the excavated pits were characterized as sandy‐textured, gleyed, and containing calcareous and clay‐enriched layers. A good match between HYDRUS‐analytical results for layered soils and an idealized homogeneous one illustrates that BOT is a robust and quick technique for the estimating Ksat = 2–3 cm/h in the coarse‐textured wadi bed vadose zone overlaying a transient water table. BOT is better than classical auger hole tests because they test a larger soil volume through induced seepage. BOT is also more suitable for drainage trenches and other excavations, allowing for easier observation, soil sampling from the banks, and rapid dewatering.