THC Modelling of Bentonite Barrier of Geological Repository in Granite and Its Impact on Long-Term Safety

Abstract

As in any other industry, nuclear energy results in the accumulation of some waste, which needs to be managed safely and responsibly due to its radiotoxicity. In the case of highly radioactive waste, geological disposal in stable rock is considered a broadly accepted solution. For the evaluation of the long-term safety of a geological repository, the assessment of radionuclide transport needs to be carried out. Radionuclide transport through engineered and natural barriers of the repository will highly depend on the barriers’ transport-related properties, which will be determined by coupled thermal, hydraulic, chemical, mechanical, biological, and radiation processes taking place in those barriers. In this study, the thermo-hydro-chemical (THC) state of bentonite was analysed considering CO2 gas diffusion and temperature-dependent solubility in water. Reactive transport modelling of bentonite under non-isothermal conditions was performed with the COMSOL Multiphysics software (v6.0), coupled with the geochemical solver Phreeqc via the iCP interface. The modelling demonstrated that the consideration of chemical processes in bentonite had no significant influence on non-reactive Cl− transport; however, it would be important for other radionuclides whose sorption in porous media depends on the porewater pH. Based on the modelling results, changes in the bentonite mineralogical composition and, subsequently, porosity depend on the partial CO2 pressure at the bentonite–granite boundary. In the case of low CO2 partial pressure at the bentonite–granite interface, the calcite dissolution led to a slight porosity increase, while higher CO2 partial pressure led to decreased porosity near the interface.

Keywords

• geological disposal
• coupled thermo-hydro-chemical processes
• modelling
• COMSOL Multiphysics
• iCP
• Phreeqc