Water Research X (May 2022)
The interplay of suspended sediment concentration, particle size and fluid velocity on the rapid deposition of suspended iron oxide particles in PVC drinking water pipes
Abstract
The inner walls of drinking water pipes are often expected to be clean and controlled surfaces to assure safe water access to the public. However, these surfaces are typically contaminated with particulate materials and biofilms that eventually degrade water quality. While water utilities place significant efforts in identifying and flushing material deposits from compromised pipes, the development of effective preventive strategies is still limited by the lack of knowledge about material accumulation processes. The aim of this paper is to examine the interplay between suspended sediment concentration, particle size and fluid velocity and the attachment of suspended iron oxide particles in PVC drinking water pipes. For that purpose, a series of short experiments were completed, whereby water amended with a known concentration of selected and stable iron oxide particles was introduced in a full-scale pipe loop laboratory over a short period of time and both turbidity and suspended sediment concentration (SSC) were measured at the inlet and outlet of the pipe loop. Results showed that a selected fraction of the injected particles with sizes above a specific threshold in the range of 4.6 to 6.8 µm had not reached the downstream section of the pipe loop, but instead remained attached to the pipe walls. In addition, exponential decay of the SSC was observed to occur along the pipes and to cause most of the sediments to accumulate in the upstream section of the pipe loop. The research improved our understanding of the physical processes of particulate material accumulation in DWDSs, and it will help water utilities forecast and monitor material accumulation and discolouration potential.
