A Multifocal Study Investigation of Pyrolyzed Printed Circuit Board Leaching

Abstract

Electric waste from numerous devices that are put out of use every day has some form of printed circuit board that contains precious and valuable metals in their components. In order to extract these metals, the printed circuit boards were crushed and pyrolyzed into powder. The fine pyrolyzed printed circuit board (PPCB) powder was separated into fractions, and the fine metallic fraction was used as a raw material for metal leaching extraction. In order to better understand how various metal species react in leaching media, several leaching agents were used (sulfuric acid, nitric acid, glycine, and acid mine drainage-AMD) alone, and with the addition of hydrogen peroxide. Additionally, the influence of the S/L ratio and leaching temperature were investigated in sulfuric acid leaching solutions, as this is the one most widely used. In one case, the reactor was heated in a thermal bath, while in the other, it was heated in an ultrasonic bath. Lastly, several experiments were conducted with a (consecutive) two-pronged leaching approach, with and without applied pretreatment. The aim of this paper is to give a multifocal and detailed approach to how metals such as Al, Cu, Co, Zn, Sn, and Ca behave when extracted from fine PPCB powder. However, some attention is given to Nd, Pd, Pb, and Ba as well. One of the main findings is that regardless of the pretreatment or the sequence of leaching media applied, consecutive two-pronged leaching cannot be used for selective metal extraction. However, AMD was found to be suitable for selective leaching with very limited applications.

Keywords

• e-waste
• hydrometallurgy
• acidic media
• oxidizing agent
• metal extraction