Dynamics of regime transition of autoignitive jet flames from conventional to MILD combustion

Abstract

Turbulent combustion of jet flames in a hot diluted coflow of combustion products has been studied across a range of jet Reynolds numbers for propane, ethylene, and an ethylene-propane blend as fuels. The study revealed a transition from conventional autoignitive combustion to a regime of Moderate or Intense Low-oxygen Dilution (MILD) combustion, which is characterized by a nearly invisible flame. The flames studied are luminous at low jet velocities and become MILD at higher jet velocities. Planar Laser-Induced Fluorescence (PLIF) of formaldehyde (CH2O), a key intermediate species in hydrocarbon combustion, is combined with CH*-chemiluminescence imaging and Rayleigh scattering to investigate the phenomena. The transition to MILD combustion is found to accompany a broadening of the formaldehyde region, indicating a broader low-temperature reaction zone. As the transition is approached, the appearance of holes in the chemiluminescent front is also observed. Correspondence between the location and structure of these holes with regions of formaldehyde in the flame are illustrated. These regions are proposed to be signatures that precede the transition to a fully MILD flame. In other words, the transition to MILD combustion begins at a local level and the MILD region spreads to engulf the entire combusting mixture. Scalar gradients were imaged to further unravel the local turbulence/chemistry interactions that yield the MILD inception. The measured scalar gradients were found to be commensurate with scalar gradients obtained from chemical kinetic simulations at the stoichiometric mixture fractions, while being an order of magnitude larger at other locations; this suggests that the inception of MILD combustion occurs near the stoichiometric region.

Keywords

• MILD combustion
• Turbulent non-premixed jet flame
• Laser diagnostics
• Autoignition
• Ethylene and Propane
• Jet-in-vitiated-coflow (JIVCF) burner