Easily Sinterable Low-Alloy Steel Powders for P/M Diamond Tools

Abstract

The work presents the design and fabrication procedures used to manufacture inexpensive iron-base powders employed as a matrix in diamond-impregnated tool components. Three newly developed low alloy steel powders, containing from 94.4 to 99.4 wt.% Fe, have been formulated with the assistance of ThermoCalc software and produced by means of a proprietary process patented by AGH-UST. It has been shown that the powders are readily pressureless sintered to a closed porosity condition (>95% theoretical density) at a temperature range between 840 and 950 °C. All as-consolidated materials achieve the desired tool matrix hardness of more than 200 HV. One of the experimental powders has been designed to partly melt within the sintering window. This is particularly important in fabrication of wire saw beads by the conventional press and sinter route because sintering of a diamond-impregnated ring and its further brazing to a tubular steel holder can be combined into one operation.

Keywords

• sintered diamond tools
• pressureless sintering
• sinterability
• low-alloy steel powders