Frontiers in Materials (Sep 2023)
Mechanical properties of Lop Nor salt rock fillers for subgrade and its forecast model construction
Abstract
A deep exploration was conducted on the evolution law of the mechanical properties of salt rock fillers under the influence of different forming parameters in the Lop Nor area to promote the engineering application process of salt rock. The accuracy of primary regression, square regression, and support vector machine (SVM) regression algorithms in predicting the mechanical properties of salt rock fillers was compared, and the most accurate prediction model for the California bearing ratio (CBR) and rebound modulus of salt rock fillers were recommended. The results showed that the optimal brine content of SC-40, SC-20, and SC-10 salt rock fillers was between 8.2% and 9.3%, with a dry density of approximately 1.69–1.76 g/cm3. The CBR of salt rock samples gradually decreased with an increase in brine content, and the rebound modulus was higher than 90.6 MPa. As the compaction degree increased, the CBR value increased significantly, and the rebound modulus increased by approximately 28.1 MPa. As the immersion time increased, the mechanical properties of salt rock gradually decreased. Among the various regression models, the SVM prediction model had the highest accuracy index coefficient of determination (R2), whereas the mean absolute percentage error (MAPE), root mean square error (RMSE), and mean absolute error (MAE) were the smallest. Therefore, the SVM prediction model was recommended to accurately estimate the mechanical properties of salt rock roadbed fillers and provide a reference for the regulation of compaction parameters and the guarantee of bearing capacity characteristics of salt rock roadbeds.
Keywords
