A new method used in the process of cleaning channels from turbidity and sediments

Arifjanov Aybek; Vokhidova Umida; Tursunova Elza; Melikuziyev Sarvar

doi:10.1051/e3sconf/202450807005

E3S Web of Conferences (Jan 2024)

A new method used in the process of cleaning channels from turbidity and sediments

Arifjanov Aybek,
Vokhidova Umida,
Tursunova Elza,
Melikuziyev Sarvar

Affiliations

Arifjanov Aybek: Tashkent Institute of Irrigation and Agricultural Mechanization Engineers, National Research University
Vokhidova Umida: Tashkent institute of textile and light industry
Tursunova Elza: Tashkent Institute of Architecture and Civil Engineering
Melikuziyev Sarvar: Tashkent Institute of Irrigation and Agricultural Mechanization Engineers, National Research University

DOI: https://doi.org/10.1051/e3sconf/202450807005
Journal volume & issue: Vol. 508
p. 07005

Abstract

Read online

Article mentions the use of a new technology for cleaning irrigation systems from muddy sediments. This technology was modeled and tested using Ansys Mechanical Finite Element Analysis (FEA) Software for Structural Engineering. Analytical analyzes were carried out to maintain the design parameters of irrigation system coatings. As a result of the analysis, a deformable tooth device using a wedge with a unit of k (N/m) is applied to the coating with an impact force F (N) at an angle of α =100-300, so that it is compressed in the range of Δl =5-15 (mm) without damaging the coating of the irrigation system. determined.

Published in E3S Web of Conferences

ISSN: 2267-1242 (Online)
Publisher: EDP Sciences
Country of publisher: France
LCC subjects: Geography. Anthropology. Recreation: Environmental sciences
Website: http://www.e3s-conferences.org/

About the journal