V<sub>2</sub>O<sub>5</sub>, CeO<sub>2</sub> and Their MWCNTs Nanocomposites Modified for the Removal of Kerosene from Water
Thamer Adnan Abdullah,
Tatjána Juzsakova,
Rashed Taleb Rasheed,
Muhammad Ali Mallah,
Ali Dawood Salman,
Le Phuoc Cuong,
Miklós Jakab,
Balázs Zsirka,
Karol Kułacz,
Viktor Sebestyén
Affiliations
Thamer Adnan Abdullah
Sustainability Solutions Research Lab, Bio-, Environmental and Chemical Engineering Research and Development Center, Faculty of Engineering, University of Pannonia, P.O. Box 158, H-8201 Veszprem, Hungary
Tatjána Juzsakova
Sustainability Solutions Research Lab, Bio-, Environmental and Chemical Engineering Research and Development Center, Faculty of Engineering, University of Pannonia, P.O. Box 158, H-8201 Veszprem, Hungary
Rashed Taleb Rasheed
Chemistry Branch, Applied Sciences Department, University of Technology, Baghdad P.O. Box 19006, Iraq
Muhammad Ali Mallah
National Centre of Excellence in Analytical Chemistry, University of Sindh, Jamshoro 76080, Pakistan
Ali Dawood Salman
Sustainability Solutions Research Lab, Bio-, Environmental and Chemical Engineering Research and Development Center, Faculty of Engineering, University of Pannonia, P.O. Box 158, H-8201 Veszprem, Hungary
Le Phuoc Cuong
Department of Environmental Management, Faculty of Environment, The University of Danang—University of Science and Technology, Danang 550000, Vietnam
Miklós Jakab
Engineering Research and Development Centre, University of Pannonia, P.O. Box 158, H-8201 Veszprem, Hungary
Balázs Zsirka
Research Group of Analytical Chemistry, Laboratory for Surfaces and Nanostructures, Center for Natural Sciences, University of Pannonia, P.O. Box 158, H-8201 Veszprem, Hungary
Karol Kułacz
Faculty of Chemistry, University of Wroclaw, F. Joliot-Curie 14, 50-383 Wrocław, Poland
Viktor Sebestyén
Sustainability Solutions Research Lab, Bio-, Environmental and Chemical Engineering Research and Development Center, Faculty of Engineering, University of Pannonia, P.O. Box 158, H-8201 Veszprem, Hungary
In this paper, the application of multiwalled carbon nanotubes (MWCNTs) based on metal oxide nanocomposites as adsorbents for the removal of hydrocarbons such as kerosene from water was investigated. Functionalized MWCNTs were obtained by chemical oxidation using concentrated sulfuric and nitric acids. V2O5, CeO2, and V2O5:CeO2 nanocomposites were prepared using the hydrothermal method followed by deposition of these oxides over MWCNTs. Individual and mixed metal oxides, fresh MWCNTs, and metal oxide nanoparticle-doped MWCNTs using different analysis techniques were characterized. XRD, TEM, SEM, EDX, AFM, Raman, TG/DTA, and BET techniques were used to determine the structure as well as chemical and morphological properties of the newly prepared adsorbents. Fresh MWCNTs, Ce/MWCNTs, V/MWCNTs, and V:Ce/MWCNTs were applied for the removal of kerosene from a model solution of water. GC analysis indicated that high kerosene removal efficiency (85%) and adsorption capacity (4270 mg/g) after 60 min of treatment were obtained over V:Ce/MWCNTs in comparison with fresh MWCNTs, Ce/MWCNTs and V/MWCNTs. The kinetic data were analyzed using the pseudo-first order, pseudo-second order, and intra-particle diffusion rate equations.
