The Effect of Soft Nanoparticle Size and Concentration on Wear Behavior in Mixed Lubrication Conditions

Abstract

This research study investigates how incorporating soft nanoparticles affect the wear behavior and the characteristics of the materials in three-body mixed lubrication conditions. A disk-on-block tribometer was used to revealed a positive correlation between plasticity index and wear rates, indicating that increased plastic deformation leads to higher wear. The size and concentration of copper oxide (CuO) nanoparticles significantly influenced wear behavior. The study found that for block materials with a hardness of 27 HRC and 43 HRC paired with a disk of 58 HRC, increasing nanoparticle concentration and using larger nanoparticles relative to surface roughness (larger nanoparticle size and surface roughness ratio) resulted in reduced wear. The larger nanoparticles can more effectively fill the gaps on the smoother surface, increasing contact area and minimizing plastic deformation during sliding, especially when the contact is more elastic. However, when the counteracting block material is significantly harder than the disk, the effect of nanoparticles might be reversed, potentially leading to increased wear. These findings suggest a complex interplay between material properties, nanoparticle characteristics, and wear resistance, influenced by the relative hardness of contacting surfaces. This research offers valuable insight for developing materials with improved wear performance in applications involving sliding friction in third-body contact.

Keywords

• plasticity index
• wear
• nanoparticle
• cuo