Energy analysis using carbon and metallic oxides-based nanomaterials inside a solar collector

Abstract

The effectiveness of a flat-plate solar collector was studied by using SiO2, Al2O3, Graphene, and graphene nanoplatelets nanofluids with distilled water as the working fluids. The energy efficiency was theoretically compared using MATLAB programming. The prepared carbon and metallic oxides nanomaterials were structurally and morphologically characterized via field emission scanning electron microscope. The study was conducted under different operating conditions such as different volume fractions (0.25%, 0.5%, 0.75% and 1%), fluid mass flow rate (0.0085, 0.017, and 0.0255 kg/s), input temperatures (30, 40, and 50 °C), and solar irradiance (500, 750, and 1000 W/m2). Nanofluids showed better thermophysical properties compared to standard working fluids. With the addition of the nanofluids SiO2, Al2O3, Gr and GNPs to the FPSC the highest efficiency of 64.45%, 67.03%, 72.45%, and 76.56% respectively was reached. The results suggested that nanofluids made from carbon nanostructures and metallic oxides can be used in solar collectors to increase the parameters of heat absorbed/loss compared to water only usage.

Keywords

• Flat plate solar collector
• Thermal efficiency
• Graphene
• Graphene nanoplatelets
• Metallic oxides