Fluid Flow in Nanosilver-Impregnated Heat-Treated Beech Wood in Different Mediums

Abstract

Specific gas permeability of beech wood was determined and compared with values obtained after nanosilver-impregnation and heat-treatment in three mediums of air, water, and water steam at 150 °C for four durations of 1, 2, 3, and 4 h. Separate sets of specimens for each group were prepared and impregnated with a 400 ppm aqueous nanosilver suspension. The results revealed that the effect of heat treatment in hot-air depended on the duration of treatment. Hydrothermal treatment generally increased gas permeability, this was attributed to the dissolving of extractives in the hot water medium, although lower duration of one hour did not significantly change permeability. Hygrothermal treatment increased gas permeability at all four durations, revealing its effectiveness as a pre-treatment to improve penetration of preservatives and fire-retardants into wood texture in wood preservation industry. High thermal conductivity of silver nanoparticles intensified the effects of heat treatment in all mediums.

Keywords

• heat treatment mediums
• nanotechnology
• solid wood
• specific gas permeability
• vacuum pressure