Journal of Manufacturing and Materials Processing (Aug 2022)
2D Axisymmetric Modeling of Refill Friction Stir Spot Welding and Experimental Validation
Abstract
The development of the simulation of refill friction stir spot welding (RFSSW) is critical to be able to predict the behavior of aluminum in the process under specific parameters. A two-dimensional axisymmetric thermo-mechanical model of the RFSSW process for 7075-T6 aluminum alloy sheet was developed and validated with experimental data. Welding temperatures and material flow, including defect formation, were accurately predicted by the model. While these results are encouraging, further development of bonding criteria is needed for simulation models, in order to enable the prediction of properties such as joint strength. The simulation was validated by a comparison of temperatures measured in the weld, which were demonstrated to be accurate at all positions in and around the weld nugget, within 10% of measured values. Additional validation of material flow was performed with post-weld optical microscopy where the simulation is shown to be able to predict the presence or absence of internal volumetric defects based on the variation in process parameters. Finally, the prediction of the tool process forces during the welding cycle were evaluated; however, both probe and shoulder forces were overestimated using the standard flow stress data for AA 7075-T6.
Keywords