Infrared Thermography: A Method to Visualise and Analyse Sulphide Oxidation

Abstract

Environmental testing of sulphidic ores and wastes aims to assess the release of metals and metalloids at acid pH conditions and the samples’ likelihood to produce acid rock drainage (ARD). However, the majority of established ARD tests measure geochemical properties of samples and cannot visualise the exothermic oxidation reactions and their intensity leading to metalliferous drainage in all pH environments. This paper proposes a new protocol to detect and visualise the sulphide oxidation in ores and wastes. Six nearly monomineralic sulphides were crushed, sieved to two size fraction (0.09–4 mm), milled to powder and treated with H2O2. The thermal energy released upon sulphide oxidation was optically detected and temperatures measured using a portable infrared thermographic camera. Based on temperature–time progression curves, the oxidation reactivity of sulphides was derived from high to low: chalcopyrite > arsenopyrite > pyrite > sphalerite > stibnite > galena, which depends on grain size, amount of sulphides and other non-sulphide mineral phases present in the sample material. The study demonstrates that the application of H2O2 to sulphide sample powders and subsequent visualisation of the treated materials using a thermographic camera represents a rapid technique in revealing the presence of oxidising sulphides under all pH conditions.

Keywords

• thermal imaging
• thermographic camera
• acid rock drainage
• metalliferous drainage
• hydrogen peroxide
• leaching