Scientific Reports (Mar 2023)

Optimization of shadow evaporation and oxidation for reproducible quantum Josephson junction circuits

  • Dmitry O. Moskalev,
  • Evgeniy V. Zikiy,
  • Anastasiya A. Pishchimova,
  • Daria A. Ezenkova,
  • Nikita S. Smirnov,
  • Anton I. Ivanov,
  • Nikita D. Korshakov,
  • Ilya A. Rodionov

DOI
https://doi.org/10.1038/s41598-023-31003-1
Journal volume & issue
Vol. 13, no. 1
pp. 1 – 7

Abstract

Read online

Abstract The most commonly used physical realization of superconducting qubits for quantum circuits is a transmon. There are a number of superconducting quantum circuits applications, where Josephson junction critical current reproducibility over a chip is crucial. Here, we report on a robust chip scale Al/AlOx/Al junctions fabrication method due to comprehensive study of shadow evaporation and oxidation steps. We experimentally demonstrate the evidence of optimal Josephson junction electrodes thickness, deposition rate and deposition angle, which ensure minimal electrode surface and line edge roughness. The influence of oxidation method, pressure and time on critical current reproducibility is determined. With the proposed method we demonstrate Al/AlOx/Al junction fabrication with the critical current variation $$(\sigma /\langle {I_{c} } \rangle )$$ ( σ / ⟨ I c ⟩ ) less than 3.9% (from 150 × 200 to 150 × 600 nm2 area) and 7.7% (for 100 × 100 nm2 area) over 20 × 20 mm2 chip. Finally, we fabricate separately three 5 × 10 mm2 chips with 18 transmon qubits (near 4.3 GHz frequency) showing less than 1.9% frequency variation between qubits on different chips. The proposed approach and optimization criteria can be utilized for a robust wafer-scale superconducting qubit circuits fabrication.