The Crystallization and Melting Behavior of Neodymium-Based Butadiene Rubber Blends

Abstract

This study investigates the influence of poly(butadiene-isoprene) copolymer rubber (BIR) and TDAE oil on the crystallization and melting behavior of neodymium-based butadiene rubber (Nd-BR). The study demonstrates that the melting points of Nd-BR and its blends decrease with lower crystallization temperatures. Below the critical crystallization temperature (Tc,c), the melting behavior shows dual peaks in distinct temperature ranges, which are attributed to different spherulitic sizes. The addition of BIR or TDAE oil lowers the Tc,c, with TDAE oil exerting a more substantial effect. These diluents mainly influence the nucleation temperature and crystallinity level of Nd-BR while having a minimal effect on the crystallization mechanism. A master curve, which overlaps for various samples, is developed by correlating the peak melting temperature (Tm,peak) with the Tc. This curve facilitates a quantitative assessment of the effects of BIR and TDAE oil on Nd-BR, highlighting the greater influence of TDAE oil on the crystalline structure compared with BIR at equivalent mass fractions. By applying the Lorentz equation and multi-peak fitting, a relationship between the melting points and crystallization temperatures is established, enabling the calculation of the equilibrium melting points (Tm0) for different samples. The findings show a reduction in the Tm0 due to the diluents; specifically, the Tm0 is approximately 0 °C for pure Nd-BR, and it decreases to −4.579 °C and −6.579 °C for samples with 50 PHR TDAE oil and 60 wt.% BIR, respectively.

Keywords

• neodymium-based butadiene rubber
• dilution effect
• equilibrium melting point
• crystalline structure