Manufacturing and compatibilization of PLA/PBAT binary blends by cottonseed oil-based derivatives

Abstract

This research work aims at the compatibilization of poly(lactic acid)/poly(butylene adipate-co-terephthalate), PLA/PBAT binary blends by using cottonseed oil derivatives, i.e. epoxidized (ECSO) and maleinized (MCSO) cottonseed oil. The potential of these vegetable oil-based compatibilizers are compared versus the effects of a conventional styreneacrylic oligomer. The base PLA/PBAT binary blend composition was 80 wt% PLA/20 wt% PBAT and the amount of compatibilizer was set to 1 and 7.5 wt%. The effects of the different compatibilizers were evaluated on PLA/PBAT films in terms of mechanical and thermal properties as well as blend’s morphology by field emission scanning electron microscopy (FESEM). Complementary, biodisintegration tests in controlled compost soil and surface properties were evaluated to assess the effects of the compatibilizers. Addition of 1 wt% ECSO and MCSO led to a remarkable increase in the elongation at break up to values over 100% with regard to neat PLA. Despite this, maximum elongation at break was obtained for the compatibilized PLA/PBAT blend with 7.5 wt% MCSO, reaching values of about 321.2% respect neat PLA keeping mechanical resistant properties, such as Young’s modulus and tensile strength, at high levels. Therefore, vegetable oil-derived compatibilizers stand out as environmentally friendly additives for PLA/PBAT binary blends with improved properties.

Keywords

• Biopolymers, biocomposites
• poly(lactic acid) PLA
• cotton seed oil
• maleinization
• epoxidation