Review of Vibroacoustic Analysis Methods of Electric Vehicles Motors

Abstract

The dynamic development of electromobility has resulted in new directions of research, one of which is the analysis of the noise of traction motors. The designs of the motors used in electric vehicles are relatively new and often modified. In addition, strong competition also forces an increase in the power generated per unit mass of the motor, often at the expense of weakening the mechanical structure. This may result in an increase in the noise level generated by the electric drive, so this issue should be analyzed at the motor design stage. Different construction and operating conditions in relation to industrial or railway traction motors make it necessary to constantly develop methods for the noise analysis of the motors for electric vehicles. The aim of this article is to review the methods used so far in an analysis of the noise generated by the motors for electric vehicles. Three main methods are used by the authors of this paper: the analytical method, the hybrid method using two-dimensional models, and the hybrid method using three-dimensional models. In addition to the review of these methods, the paper also focuses on a synthetic summary of the most important factors determining the level and nature of the noise generated by electric vehicle motors.

Keywords

• noise
• vibrations
• electric vehicles
• electric drives
• NVH