Evolution of mining‐induced stress in fully mechanized top‐coal caving under high horizontal stress

Abstract

Abstract In fully mechanized top‐coal caving (FMTC), the effects of coal caving are closely related to the degree of damage to the top‐coal which is determined by the stress state therein. Therefore, research into the evolution of mining‐induced stress field is key to understanding failure mechanisms of top‐coal. By taking the 12 309 FMTC face in Wangjialing Coal Mine (China) as the engineering background and using field measurement and numerical simulation, we studied the evolution of the principal stress field in FMTC under high horizontal stress. The research results demonstrated that in situ stress in Wangjialing Coal Mine was a high horizontal stress and lateral pressure coefficients in the north‐south and east‐west directions were 1.52 and 0.45, respectively. Under the influence of mining, principal stresses were concentrated in front of the coal wall, with concentration factors of 2.26, 2.24, and 2.85, respectively. The minimum principal stress in unconstrained sides of the top‐coal in the roof‐control zone was tensile. The directions of intermediate and minimum principal stresses in the top‐coal were more sensitive to the influence of mining compared to the maximum principal stress. During rotation of the principal stress direction in top‐coal, the location (19 m in front of the coal wall) where the maximum and intermediate principal stresses were equal and the location of the coal wall are key positions.

Keywords

• coal mining
• FMTC
• high horizontal stress
• numerical analysis
• principal stress field