Journal of Seed Science ()

Temperature and seed moisture content affect electrical conductivity test in pea seeds

  • Lara Bernardes da Silva Ferreira,
  • Nayara Alves Fernandes,
  • Luan Costa de Aquino,
  • Anderson Rodrigo da Silva,
  • Warley Marcos Nascimento,
  • Érica Fernandes Leão-Araújo

DOI
https://doi.org/10.1590/2317-1545v39n4181021
Journal volume & issue
Vol. 39, no. 4
pp. 410 – 416

Abstract

Read online

Abstract: Several factors affect the electrical conductivity test efficiency, with emphasis given to the initial water content and the temperature during imbibition. This study aimed to evaluate the effect of the initial water content of pea seeds and the temperature on the electrical conductivity test efficiency. Six lots of ‘Mikado’ pea were used, which were previously tested for initial characterization. In the first trial, based on the initial value of the samples, the seed moisture content was adjusted to 9, 11, 13 and 15% and then the seeds were submitted to the electrical conductivity test. In the second trial, the water for seed imbibition was kept for 24 hours at 10, 15, 20, 25 and 30 ºC, and after that time the seeds were added and soaked for other 24 hours at the temperatures already mentioned. It was observed that initial seed moisture content and water temperature during imbibition influenced the results of the electrical conductivity test. This test should be carried out with distilled water, previously maintained for 24 hours at 25 °C for temperature stabilization. Then, the seeds with seed moisture content between 11 and 15% should be put to soak at 25 °C, and maintained at this temperature for 24 hours.

Keywords