Effect of Screen-Panel Tensile Length and Material Characteristics on Screening Performance of Flip-Flow Vibrating Screens for Dry-Screening Fine, Low-Grade Bituminous Coal

Abstract

Flip-flow vibrating screens (FFVSs) effectively tackle the challenges posed by the dry deep-screening of wet, fine, low-grade bituminous coal, thereby facilitating advancements in the thermal coal preparation process. The tensile lengths of the screen panels not only influence the service lives of the screen panels but also play a pivotal role in determining the screening performance of the FFVSs. To investigate the effect of the screen-panel tensile length on the screening performance of an FFVS, this study constructs a dual-mass flip-flow screening test rig. The experimental results reveal that when the fine-particle content and the external water content in the feed of low-grade bituminous coal are 55% and 16%, respectively, the most favorable tensile length of the screen panels is 2 mm. With a fine-particle content of 55% in the feed of low-grade bituminous coal and an increase in the external water content from 4% to 20%, the screening efficiency of the FFVS initially decreases and then increases. Notably, low-grade bituminous coal with 16% external water content poses the most challenging screening conditions. Furthermore, when the external water content of the low-grade bituminous coal is 16% and the fine-particle content in the feed increases from 25% to 55%, the screening efficiency of the FFVS gradually improves.

Keywords

• flip-flow vibrating screen
• screen-panel tensile length
• screening performance
• low-grade bituminous coal