Journal of Materials Research and Technology (Nov 2023)
Nanophase transformation and strengthening - Toughening mechanism of the Cu–15Ni–8Sn alloy during aging
Abstract
The Cu–15Ni–8Sn alloy ingot was prepared in the medium-frequency induction melting furnace. The hot extruded alloy was treated by solid solution at 840 °C for 60 min and aging at 400 °C for different times (0 miñ480 min). The effect of aging time on the evolution of the nanophase of Cu–15Ni–8Sn alloy and the strengthening-toughening mechanism were studied. The results show that at the beginning of aging, the alloy undergoes spinodal decomposition, the wavelength of the modulated structure is approximately 3∼7 nm, the ordered phase transformation of D022 and L12 occurs simultaneously, and the ordered phase size is approximately 5 nm. With the extension of aging time, the modulated structure became coarser, and the wavelength of the modulated structure increased to 5–9 nm. At the same time, the D022 ordered phase changed to the L12 ordered phase, and a continuous distribution of elliptical discontinuous precipitation appeared at the grain boundary. The ratio of the long and short axes of the discontinuous precipitation was approximately 4.7. In the late aging period, the D022 ordered phase was basically transformed into the L12 ordered phase, and discontinuous precipitation, which is incompatible with the matrix, extended into the crystal. After 120 min of aging at 400 °C, the hardness, strength, and elongation of the alloy are 105.4 HRB, 839.8 MPa and 9.6 %, respectively. The peak-aging states D022 and L12 coexist in an orderly phase at the nanoscale, and this nanoscale strengthening phase is completely integrated with the matrix, which improves the strength and toughness of the alloy. The research results can provide support for the development of high-performance copper alloys in the ocean.
