A Simplified Method for Predicting Bond–Slip Behaviour of Ribbed Bars and Threaded Rods Glued in Glulam along the Grain

Abstract

The bond between a steel reinforcement/rod and glulam plays a crucial role in the resistance and deformation capacity of timbers joints. Existing studies provide different bond–slip models for reinforcements and rods with different anchorage lengths, in which the relationship between local bond stress and global bond behaviour cannot not be established. This study presents a unified analytical method for predicting the bond–slip behaviour of ribbed bars and threaded rods along the grain using a local bond–slip model of reinforcement at the elastic and post-yield stages. In the analytical method, equilibrium, compatibility, and constitutive models for reinforcement and rods are considered. The method is verified using test data of rebars and rods with different anchorage lengths. Comparisons between the experimental and calculated results suggest that the analytical method yields reasonably good predictions of the load–slip relationship and failure mode. Furthermore, the embedment lengths required for yield and the ultimate strengths of the reinforcement and rods along the grain are determined by assuming uniform bond stress distributions over the elastic and post-yield steel segment. The average bond stress over the entire anchorage length is calculated and compared with existing equations. Design recommendations for anchorage lengths are proposed for ribbed bars and threaded rods glued in glulam.

Keywords

• bond strength
• ribbed bars
• steel rods
• glulam
• analytical method
• design equation