Remote Sensing (Jul 2024)

An Improved Remote Sensing Retrieval Method for Elevated Duct in the South China Sea

  • Yinhe Cheng,
  • Mengling Zha,
  • Wenli Qiao,
  • Hongjian He,
  • Shuwen Wang,
  • Shengxiang Wang,
  • Xiaoran Li,
  • Weiye He

DOI
https://doi.org/10.3390/rs16142649
Journal volume & issue
Vol. 16, no. 14
p. 2649

Abstract

Read online

Elevated duct is an atmospheric structure characterized by abnormal refractive index gradients, which can significantly affect the performance of radar, communication, and other systems by capturing a portion of electromagnetic waves. The South China Sea (SCS) is a high-incidence area for elevated duct, so conducting detection and forecasts of the elevated duct in the SCS holds important scientific significance and practical value. This paper attempts to utilize remote sensing techniques for extracting elevated duct information. Based on GPS sounding data, a lapse rate formula (LRF) model and an empirical formula (EF) model for the estimation of the cloud top height of Stratocumulus were obtained, and then remote sensing retrieval methods of elevated duct were established based on the Moderate Resolution Imaging Spectroradiometer (MODIS) remote sensing data. The results of these two models were compared with results from the elevated duct remote sensing retrieval model developed by the United States Naval Postgraduate School. It is shown that the probability of elevated duct events was 79.1% when the presence of Stratocumulus identified using GPS sounding data, and the trapping layer bottom height of elevated duct well with the cloud top height of Stratocumulus, with a correlation coefficient of 0.79, a mean absolute error of 289 m, and a root mean square error of 598 m. Among the different retrieval models applied to MODIS satellite data, the LRF model emerged as the optimal remote sensing retrieval method for elevated duct in the SCS, showing a correlation coefficient of 0.51, a mean absolute error of 447 m, and a root mean square error of 658 m between the trapping layer bottom height and the cloud top height. Consequently, the encouraging validation results demonstrate that the LRF model proposed in this paper offers a novel method for diagnosing and calculating elevated ducts information over large-scale marine areas from remote sensing data.

Keywords