بهداشت و ایمنی کار (Jun 2023)
Feasibility of Improvement of the Filter Performance of Particle Filtering Respirators by Using Composite Media of Polyacrylonitrile Nanofiber (PAN) and Montmorillonite Clay Nanoparticles (MMT)
Abstract
Introduction: The important parameters for evaluating the performance of particle filtering respirators in international standards are the filtration efficiency and respiratory resistance of the mask filter against airflow passage. To improve nanofiber filtration efficiency while creating the least breathing difficulty for the wearer, various research has been or is being conducted worldwide. This study investigated the effect of using polyacrylonitrile (PAN) nanofiber composite membrane and montmorillonite clay nanoparticles (MMT) in enhancing particle-filtering respirators’ filter performance, achieving higher filtration efficiency while maintaining optimal respiratory resistance conditions. Material and Methods: First, PAN polymer solution containing zero, 1%, 2%, 3%, and 5% MMT nanoparticles was prepared, and then PAN/MMT nanofiber composite membrane was synthesized in an electrospinning machine. Filtration efficiency was measured in diameter range of 0.3, 0.5, 1, and 3 microns using sodium chloride aerosol. Additionally, filter breathing resistance was measured at flow rates of 30, 85, and 95 liters per minute. Results: The efficiency of synthesized composite nanofilters for particle purification can be improved by adding MMT nanoparticles to PAN nanofibers. Optimal MMT concentration was found to be 2%. This addition resulted in an increase in filtration efficiency for particles with sizes of 0.3, 0.5, 1, and 3 microns by 4.2%, 4.88%, 3.77%, and 2.75% respectively without causing significant difference in respiratory resistance. Improved filtration efficiency can be attributed to enhanced morphology of composite nanofilters resulting from addition of MMT nanoparticles. Adding 2% MMT nanoparticles to PAN nanofibers resulted in uniform distribution and smaller fiber dimensions which did not significantly affect Packing density and porosity. Conclusion: If 2% of MMT nanoparticles are added to PAN nanofibers and used to produce particle respirators, resulting respirator will exhibit a 4.2% increase in particle filtration efficiency without increasing breathing difficulty for user. This result can help protect users from particulate pollutants in air pollution conditions.
