Analysis of compression damage pattern and strength influencing factors in graphite-tailing-filled soilbags

Abstract

Abstract To realize the resourceful use of soilbags filled with graphite tailings, their load-bearing and deformation characteristics must be fully understood. In this study, the following results were obtained by performing geometric testing of water-filled sealing bags and uniaxial compression tests of soilbags filled with graphite tailings. The volume of the soilbag expressed in rectangular form was approximately 0.773 times the actual volume. The types of compression damage to soilbags can be defined as surface damage and overall damage. The surface damage load increases with decreasing filling density and decreases with decreasing soilbag size. Moreover, the higher the tensile capacity of the soilbag material and the lower the friction between the soilbags, the greater the surface damage load. The overall damage load increased with an increase in the tensile strength of the soilbag material and decreased with an increase in the degree of filling; the overall damage load was greater for large-sized soilbags at high degrees of filling. Thus, the existing theoretical calculation method cannot accurately calculate the damage load of soilbags filled with graphite tailings, and the test results deviate from the theoretical calculation results, with the latter showing an increasing damage load with a decreasing filling degree.