Independent Heating Performances in the Sub-Zero Environment of MWCNT/PDMS Composite with Low Electron-Tunneling Energy

Abstract

The structural stability of various structures (railroads, bridges, buildings, etc.) is lowered due to freezing because of the decreasing outside temperature in winter. To prevent damage from freezing, a technology for de-icing has been developed using an electric-heating composite. For this purpose, a highly electrically conductive composite film with multi-wall carbon nanotubes (MWCNTs) uniformly dispersed in a polydimethylsiloxane (PDMS) matrix through a three-roll process was fabricated by shearing the MWCNT/PDMS paste, through a two-roll process. The electrical conductivity and the activation energy of the composite were 326.5 S/m and 8.0 meV at 5.82 Vol% of MWCNTs, respectively. The dependence of the electric-heating performance (heating rate and temperature change) on the applied voltage and environmental temperature (from −20 °C to 20 °C) was evaluated. The heating rate and effective-heat-transfer characteristics were observed to decrease as the applied voltage increased, while they showed the opposite tendency when the environmental temperature was at sub-zero temperatures. Nevertheless, the overall heating performance (heating rate and temperature change) was maintained with little significant difference in the considered external-temperature range. The unique heating behaviors can result from the low activation energy and the negative-temperature (T) coefficient of resistance (R) (NTCR, dR/dT < 0) of the MWCNT/PDMS composite.

Keywords

• multi-wall carbon nanotube (MWCNT)
• joule heating
• temperature coefficient of resistance
• composite heater
• activation energy