Vulcanization kinetics and reinforcement behaviour of natural rubber-carbon black composites: Addition of Shea-butter versus aromatic oil as plasticizers

Abstract

This work is a comparative study between Shea butter (SB) and treated distillate aromatic extract oil (TDAE) as plasticizers in the vulcanization of natural rubber (NR)- carbon black (CB) vulcanizates (—CB—S—NR—). The plasticized —CB—S—NR— composites extended scorch (Ts2) and optimum (T90) curing times. The delays in crosslinking reaction were suspected to be due to the increased viscosity (ML) and insulation of the reacting species (NR, CB, Sulfur and other curing aids) by the films of plasticizers. This effect increased the activation energy (Ea (KJ/mol)) for vulcanization. The —CB—S—NR— without plasticizer SB (SBO), showed higher ML, crosslinking density index (ΔM), rheological strength (MH) and low cure reversion properties than others. In comparison, the SB loaded —CB—S—NR— composites showed improvement in ML, ΔM, T90, with lowers Ea (KJ/mol) than TDAE samples. Also, the SB compounds exhibited higher Young's modulus Eo(MPa) than SBO and TDAE compounds. For instance, the Eo(MPa) of SB5 was over 7 and 1200 % higher than SBO and STD5 respectively. However, —CB—S—NR— filled with TDAE generally showed higher strength(MPa), attributed to stronger CB—NR interactions. Therefore, environmentally friendly SB could replace petroleum based oils for compounding rubbers.

Keywords

• Shea butter oil
• Aromatic oil
• Natural rubber
• Composites
• Plasticizer
• Reversion and reinforcement