Stress Evaluation of Welded Joints with Metal Magnetic Memory Testing Based on Tension–Compression Fatigue Test

Abstract

Metal magnetic memory testing (MMMT) is an effective nondestructive technique for fatigue damage monitoring of weldments because of its capacity for stress evaluation. An experimental investigation of the effect of the applied fatigue stress on MMMT signals, including the tangential component Bx and the normal component Bz, during tension–compression fatigue tests in welded joints was carried out systematically. The Bx and Bz signals at different fatigue cycles and fatigue stresses were collected and analyzed, and the results showed that there was a peak of Bx and abnormal peaks of Bz that existed at the welded joint before loading. After loading, the peak of Bx and the abnormal peaks of Bz reversed, and the Bx signals moved upward and the Bz signals rotated anticlockwise dramatically in the first few fatigue cycles. After the fatigue cycle number was larger than 1000, Bx and Bz were stable, with very little fluctuation. In addition, the characteristics of Bx signals, the mean value, and the peak value of the average of Bx had an extremely significant linear relationship with the applied fatigue stress during the stable stage of the fatigue test, which indicates that MMMT is a feasible method for fatigue stress evaluation and even residual fatigue life estimation for weldments in service.

Keywords

• welded joint
• tension-compression fatigue test
• metal magnetic memory testing
• characteristic extraction
• stress evaluation