Water Science and Engineering (Sep 2022)

Evaluating performance dependency of a geomorphologic instantaneous unit hydrograph-based hydrological model on DEM resolution

  • Cheng Yao,
  • Zhi-jia Li,
  • Ke Zhang,
  • Ying-chun Huang,
  • Jing-feng Wang,
  • Satish Bastola

Journal volume & issue
Vol. 15, no. 3
pp. 179 – 188

Abstract

Read online

The digital elevation model (DEM) is a type of model that has been widely used in terrain analysis and hydrological modeling. DEM resolution influences the hydrological and geomorphologic features of delineated catchments and consequently affects hydrological simulations. This study investigated the impacts of DEM resolution on the performance of the XAJ-GIUH hydrological model, a model coupling the widely used Xinanjiang (XAJ) hydrological model with the geomorphologic instantaneous unit hydrograph (GIUH), in flood simulations in small and medium-sized catchments. To test the model performance, the model parameters were calibrated at a fine DEM resolution (30 m) and then directly transferred to the simulation runs using coarser DEMs. Afterwards, model recalibration was conducted at coarser DEM resolutions. In the simulation runs with the model parameters calibrated at the 30-m resolution, the DEM resolution slightly affected the overall shape of the simulated flood hydrographs but presented a greater impact on the simulated peak discharges in the two study catchments. The XAJ-GIUH model consistently underestimated the peak discharges when the DEM resolution became coarser. The qualified ratio of peak simulations decreased by 35% when the DEM resolution changed from 30 m to 600 m. However, model recalibration produced comparable model performances when DEMs with different resolutions were used. This study showed that the impact of DEM resolution on model performance can be mitigated by model recalibration to some extent, if the DEM resolution is not too coarse.

Keywords