Optimization of the equilibrium magnetic sensor set for the SPARC tokamak

Abstract

Accurate reconstruction of the plasma equilibrium is imperative for successful operation of the SPARC tokamak. In order to assess the expected reconstruction accuracy throughout the duration of design-point discharges, the EFIT equilibrium reconstruction code was deployed for SPARC. Reconstructions from SPARC baseline scenarios were compared with free-boundary equilibria generated by FreeGS, Toksys, and the Tokamak Simulation Code. The key geometric areas of interest, where design constraints are imposed, included: the inner and outer midplane gaps, the X-point locations, as well as the strike point locations. Successful reconstructions of various reference discharges, using deviations in these key geometric quantities as metrics, were calculated from synthetic signals considering an optimized equilibrium magnetic sensor set. The optimization process for this sensor set combined a scan of randomized sensor placement with a linear perturbation analysis to determine critical sensor locations, while simultaneously conforming to design constraints on the sensor placement. This optimized set was also successful in performing equilibrium reconstructions with the addition of error to synthetic measurements of magnetic flux and magnetic field, as well as contributions from eddy currents in conducting structures. These methods represent a workflow of optimization and validation that balances the engineering constraints of sensor placement with achieving sufficient reconstruction fidelity for science and operations missions for SPARC.

Keywords

• SPARC
• EFIT
• tokamak
• equilibrium
• plasma
• design