Effect of Curing Methods on Plastic Shrinkage Cracking

Abstract

Early-age cracking during the plastic stage is unsightly and a cause of future durability problems. This paper investigates the effects of various simple curing methods used in practice to enhance early-age concrete cracking performance, including covering concrete with a plastic sheet and wet hessian fabric, surface power floating and use of cold water in the mix. The benefits offered by the use of three standard curing admixtures (Safecure Super concrete, Safecure Super 90W-10%, and superplasticizer), as well as recycled tire steel fibres at 40 kg/m3, are also examined. A digital image processing (DIP) technique is used to measure the crack widths, whilst the temperature in the concrete is measured via a thermocouple. The results show that all the concrete curing methods are successful in restraining micro and plastic shrinkage cracks, although the use of recycled tire steel fibre (RTSFC40) is most effective in eliminating micro and plastic shrinkage surface cracks. All of the examined methods are compared in terms of the speed and cost of application, quality of the surface finish and environmental credentials. This study will inform best practice on enhancing the durability and sustainability of concrete structures, particularly for slab-on-grade applications.

Keywords

• early-age concrete cracking
• plastic shrinkage cracks
• concrete curing
• shrinkage-reducing admixtures
• power float concrete
• steel-fibre-reinforced concrete