Heliyon (Oct 2024)

Green nanotechnology for the enhancement of antibacterial properties in lining leather: MgO-chitosan nanocomposite coating

  • Sobur Ahmed,
  • Sajib Sarker Imon,
  • Md Jawad Hasan,
  • Md Samaul Alam

Journal volume & issue
Vol. 10, no. 20
p. e39170

Abstract

Read online

Antimicrobial nanomaterials have received a lot of interest in recent years due to their potential to fight against microbial degradation, a common problem in leather products. In this study, a nanocomposite was synthesized with MgO nanoparticles prepared by Aloe vera leaf extract and chitosan (CS), as an innovative solution to this problem. Three nanocomposite samples (C1, C2, and C3) were formulated with varying ratios of MgO and chitosan and evaluated for antimicrobial efficacy against Escherichia coli and Bacillus subtilis. Leather treated with MgO/Chitosan nanocomposite (MgO/Chitosan-1:1) exhibited substantial inhibition zones of 13 mm and 12 mm against E. coli and B. subtilis, respectively. Characterization of MgO nanoparticles, chitosan, and MgO/CS nanocomposite was performed through FTIR, XRD, SEM, TGA, and cytotoxicity tests. The average particle size and crystallite size of MgO nanoparticles were found as 136 nm and 10.3 nm, respectively and a weight loss of 67 % for MgO/CS nanocomposite in thermogravimetric analysis. FTIR confirmed the successful incorporation of MgO nanoparticles into the chitosan matrix, evidenced by the presence of characteristic functional groups. Application of nanocomposite onto lining leather via spraying resulted in finished leather with improved color rub fastness, perspiration fastness, and thermal stability compared to untreated leather. In comparison to dry color rub fastness, wet color rub fastness was notably improved by the MgO/CS nanocomposite, with gray scale ratings ranging from 4/5 to 5. Perspiration fastness was marginally enhanced by the MgO/CS coating, with gray scale ratings ranging from 4/5 to 5 for both grain and flesh samples. Specifically, the coated leather exhibited a water vapor permeability (WVP) of 9.94 mg cm−2.hr−1 that was lower than both uncoated (12.37 mg cm−2.hr−1) and PVA-coated (11.22 mg cm−2.hr−1) leather. This study presents a promising solution to the challenge of microbial degradation in leather products and highlights the potential of natural sources for synthesizing functional nanocomposites with diverse applications in materials science and biotechnology.

Keywords