Investigation of manufacturing deviations of CPC scaffolds for improving the design process

Abstract

In current implantology, calcium phosphate cement (CPC) is increasingly used. A special focus is given to CPC scaffolds, as they are suitable for cell settlement and growth due to their positive osteoconductive properties. The design of the scaffolds is of decisive importance for this. The value ranges of the geometric parameters of these scaffolds (e.g. path distance, path diameter), which are positive for both cell settlement and cell growth, are very small. Manufacturing deviations therefore have a significant impact on cell settlement and growth. The pasty manufacturing consistency can cause sagging at the path interstices of a layer immediately below, resulting in significant manufacturing deviations. A larger path distance and thus a larger path interstitial space promotes cell settlement, but at the same time increases the risk of CPC path shape inconsistency. This in turn can have a negative effect on cell settlement. Therefore, the aim of this paper is to investigate the discrepancies between the nominal and actual state at a path distance favourable to cell settlement on the basis of manufactured CPC scaffolds. In this context, geometric and manufacturing parameters of the shape deviation are to be identified and constructive design adaptations are to be derived on the basis of these. In addition, the effects of the shape and position deviations on the flow behaviour will be investigated.

Keywords

• bone tissue engineering
• cpc
• numerical simulation
• cfd