Polymers (Nov 2023)

Experimental Study on Enhanced Oil Recovery Effect of Profile Control System-Assisted Steam Flooding

  • Long Dong,
  • Fajun Zhao,
  • Huili Zhang,
  • Yongjian Liu,
  • Qingyu Huang,
  • Da Liu,
  • Siqi Guo,
  • Fankun Meng

DOI
https://doi.org/10.3390/polym15234524
Journal volume & issue
Vol. 15, no. 23
p. 4524

Abstract

Read online

Steam flooding is an effective development method for heavy oil reservoirs, and the steam flooding assisted by the profile control system can plug the dominant channels and further improve the recovery factor. High-temperature-resistant foam as a profile control system is a hot research topic, and the key lies in the optimal design of the foam system. In this paper, lignin was modified by sulfonation to obtain a high-temperature-resistant modified lignin named CRF; the foaming agent CX-5 was confirmed to have good high-temperature foaming ability by reducing the surface tension; the formula of the profile control system (A compound system of CRF and CX-5, abbreviated as PCS) and the best application parameters were optimized by the foam resistance factor. Finally, the effect of PCS-assisted steam flooding in enhanced oil recovery was evaluated by single sand packing tube flooding, three parallel tube flooding, and large-scale sand packing model flooding experiments. The results show that CX-5 has a good high-temperature foaming performance; the foam volume can reach more than 180 mL at 300 °C, and the half-life is more than 300 s. The optimal PCS formulation is 0.3 wt% CRF as an oil displacement agent + 0.5 wt% CX-5 as a foaming agent. The optimal gas–liquid ratio range is 1:2 to 2:1, and the high pressure and permeability are more conducive to the generation and stability of the foam. Compared with steam flooding, PCS-assisted steam flooding can improve oil recovery by 9% and 7.9% at 200 °C and 270 °C, respectively. PCS can effectively improve the heterogeneity of the reservoir, and increase the oil recovery of the three-parallel tube flooding experiment by 28.7%. Finally, the displacement results of the sand-packing model with large dimensions show that PCS can also expand the swept volume of the homogeneous model, but the effect is 9.46% worse than that of the heterogeneous model.

Keywords