Toxics (Mar 2023)

Distribution and Speciation of Heavy Metal(loid)s in Soils under Multiple Preservative-Treated Wooden Trestles

  • Xiu Zeng,
  • Qian Jin,
  • Panpan Wang,
  • Chengmin Huang

DOI
https://doi.org/10.3390/toxics11030249
Journal volume & issue
Vol. 11, no. 3
p. 249

Abstract

Read online

The widespread use of wood preservatives, such as chromated copper arsenate (CCA), alkaline copper quaternary (ACQ), and copper azole (CA), may cause environmental pollution problems. Comparative studies on the effect of CCA-, ACQ-, and CA-treated wood on soil contamination are rarely reported, and the behavior of soil metal(loid) speciation affected by preservatives has been poorly understood. Soils under the CCA-, ACQ-, and CA-treated boardwalks were collected to investigate metal(loid) distribution and speciation at the Jiuzhaigou World Natural Heritage site. The results showed that the maximum mean concentrations of Cr, As, and Cu were found in soils under the CCA, CCA, and CCA plus CA treatments and reached 133.60, 314.90, and 266.35 mg/kg, respectively. The Cr, As, and Cu contamination in soils within a depth of above 10 cm was high for all types of boardwalks and limited in the horizontal direction, not exceeding 0.5 m. Cr, As, and Cu in soils were mainly present as residual fractions in all profiles and increased with depth. The proportion of non-residual As in soil profiles under CCA- and CCA plus CA-treatment and exchangeable Cu in CA- and CCA plus CA-treatment were significantly higher than those in the profiles under the other preservative treatments. The distribution and migration of Cr, As, and Cu within soils were influenced by the preservative treatment of trestles, in-service time of trestles, soil properties (e.g., organic matter content), geological disasters (e.g., debris flow), and elemental geochemical behavior. With the CCA treatment for trestles successively replaced by ACQ and CA treatments, the types of contaminants were reduced from a complex of Cr, As, and Cu to a single type of Cu, achieving a reduction in total metal content, toxicity, mobility, and biological effectiveness, thus reducing environmental risks.

Keywords