A 3D numerical analysis of the compaction effects on the behavior of panel-type MSE walls

Abstract

Soil is weak in tension but strong in compression. The resistance to tensile deformation of soil is given by the tensile force of the reinforcement in the reinforced soil, and the tensile force of the reinforcement is generated by the frictional force at the soil-reinforcement interface. When the soil-reinforcement is effectively interacted by the compaction, the deformation of the soil becomes equal to the tensile deformation of the reinforcement material, which means that the soil is bound to the tensile force of the reinforcement material and thus has a great resistance to the tensile deformation. Therefore, compaction is one of the major parameters affecting the behavior of the mechanically stabilized earth (MSE) wall. In this study, a series of numerical analyses was performed to investigate the compaction effect on the behavior of the MSE walls. The results showed that the horizontal displacement of the MSE wall significantly increased during the construction and decreased because of surcharge load application after the construction. In addition, the strains of reinforcement increased significantly during the construction and decreased slightly because of surcharge load application after the construction. Therefore, it is important to consider the compaction loads when modeling the MSE walls, so that the lateral displacement at wall facing will not be underestimated during construction and will not be overestimated because of surcharge load application after the construction.

Keywords

• mse wall
• compaction effects
• geogrids
• steel strips
• geo-strips
• plaxis 3d
• numerical analysis
• numerical modeling