Experimental Investigation of Full Hole Embedment Behavior of Bamboo Scrimber with Dowel-Type Fasteners

Abstract

A comprehensive understanding of the embedment behavior is of great importance in the design of contemporary bamboo constructions with connections utilizing dowel-type fasteners. The objective of this research was to assess the embedment behavior of bamboo scrimber using full-hole embedment tests. To investigate the effect of the loading angle and bolt diameter, a series of tests were performed using bolts of varying diameters (16 mm, 18 mm, and 20 mm) and loading angles (0° to 90°, with an increment of 15°). The experimental results demonstrated that the loading angle has a considerable influence on the embedment behavior. As the loading angle was increased, the failure mode underwent a change from a brittle failure mode, which was dominated by shear mechanisms, to a ductile failure mode, which was dominated by fiber crushing. The yield and ultimate embedment strengths showed an M-shaped response to changes in the loading angle, with the lowest values being 0°, 45°, and 90°. The bolt diameter was found to have no impact on the failure mode of the specimen. However, an increase in bolt diameter resulted in a reduction in the embedment strength when the specimen was loaded at 90°.

Keywords

• bamboo scrimber
• embedment behavior
• full-hole embedment test
• load-to-grain angle
• fastener diameter