Scientific Reports (Jul 2024)

Calligraphic interdigitated capacitive sensors for green electronics

  • Abhay Singh Thakur,
  • Vinit Srivatava,
  • Hyeong Kwang Benno Park,
  • Imen Kebaili,
  • Imed Boukhris,
  • Yun Hwan Joo,
  • Tae Hyun Sung,
  • Anuruddh Kumar,
  • Rahul Vaish

DOI
https://doi.org/10.1038/s41598-024-64461-2
Journal volume & issue
Vol. 14, no. 1
pp. 1 – 10

Abstract

Read online

Abstract This study presents a novel approach to fabricating interdigitated capacitive (IDC) touch sensors using graphite-based pencils on a wood substrate. The sensors were designed to detect touches and pressure variations, offering a cost-effective and environmentally friendly solution for sensor fabrication. The fabrication process involved abrasion of graphite pencils on a wooden substrate to create conductive traces, followed by the integration of interdigitated electrode structures. Capacitance variations resulting from touch interactions were investigated to calibrate sensor responses for tailored tasks. The sensitivity of the sensor was found to be 1.2 pF/kPa, highlighting its responsiveness to pressure variations. Additionally, the sensors were interfaced with an Arduino Uno microcontroller board to demonstrate practical applications, such as replicating arrow key functionality. Additionally, the sensors exhibit sensitivity to environmental factors, with the relative change in capacitance increasing from 0.1 to 0.65 as relative humidity ranges from 30 to 90%. Furthermore, variations in temperature from 30 to 60ºC result in a relative change in capacitance increasing to approximately 0.5. The results indicate the feasibility and versatility of using wood-based substrates and graphite-based pencils for fabricating IDC touch sensors, offering promising prospects for sustainable and accessible sensor technology.

Keywords