Effect of Processing Routes on Physical and Mechanical Properties of Advanced Cermet System

Abstract

The present research focuses on the effects of different processing routes on the physical and mechanical properties of nano Ti(CN)-based cermets with metallic binders. Tungsten carbide (WC) is added as a secondary carbide and Ni-Co is added as a metallic binder to nano Ti(CN)-based cermet processed via conventional and spark plasma sintering (SPS). A systematic comparison of the composition and sintering conditions for different cermets’ systems was carried out to design novel composition and sintering conditions. Nano TiCN powder was prepared by 30 h of ball milling. The highest density of >98.5% was achieved for the SPS-processed cermets sintered at 1200 °C and 1250 °C for 3 min at 60 MPa of pressure in comparison to the conventionally sintered cermets at 1400 °C for 1 h with a two-stage compaction process—uniaxially at 150 MPa and isostatically at 300 MPa of pressure. Comparative X-ray diffraction (XRD) analysis of the milled powders at different time intervals was performed to understand the characteristics of the as-received and milled powders. Peak broadening was observed after 5 h of ball milling, and it increased to 30 hr. Also, peak broadening and a refined carbide size was observed in the XRD and scanning electron microscope (SEM) micrographs of the SPS-processed cermet. Transmission electron microscope (TEM) analysis of the milled powder showed that its internal structure had a regular periodic arrangement of planes. SEM base scattered electron (BSE) images of all the cermets primarily showed three major microstructural phases of the core–rim–binder with black, grey, and white contrast, respectively. With the present sintering conditions, a high hardness of ~16 GPa and a fracture toughness of ~9 MPa m1/2 were obtained for SPS-processed cermets sintered at higher temperatures.

Keywords

• cermet system
• spark plasma sintering
• metal–ceramic bond
• ball milling
• ceramics