Mechanical Properties of Wood-plastic Composites Produced with Recycled Polyethylene, Used Tetra Pak® Boxes, and Wood Flour

Abstract

The recycling industry has developed rapidly in recent years. Paper, plastic, glass, and metals are the most recycled materials. In this study, composite boards were produced using recycled polyethylene (R-PE) mixed with used Tetra Pak® boxes (TPBs) and pine wood flour (PWF) as fillers. The ratios of TPB to wood flour used in study were 0%, 10%, 20%, 30%, and 40%. Six test groups of composites were prepared. For each group, four composite boards of dimensions 4 × 180 × 220 mm3 were produced. Some of the mechanical properties of the produced boards, such as the flexural strength, flexural modulus, tensile strength, tensile modulus, elongation at break, and Shore D hardness, were determined. The data obtained showed that the flexural modulus, tensile modulus, and density increased with the wood flour content. However, the flexural strength, tensile strength, and elongation at break decreased as the wood flour content was increased. As a result, it can be said that TPBs could be used as a filler instead of wood flour in the production of wood-plastic composites.

Keywords

• wood-plastic composites
• wpcs
• tetra pak® box
• wood flour
• mechanical properties