Numerical Study on the Waterjet–Hull Interaction of a Free-Running Catamaran

Abstract

Waterjet–hull interaction is the hot point and research focus in the research of waterjet-propelled crafts. This paper presents numerical studies on the interaction between a waterjet system and a catamaran. Numerical simulations of both bare hull and self-propulsion hull were carried out based on the URANS method. The SST k-ω model is selected for the closure of the URANS equations. The level set method together with the dynamic overset grid approach is used for the simulations. The body force model with the PI speed controller is used to simulate the rotational motion of the rotor in the simulations for the self-propulsion hull. Moreover, uncertainty analyses of the numerical method are conducted to verify the accuracy of the numerical solver. The numerical results of the bare hull and self-propulsion hull are compared in detail, such as the wave pattern, pressure distribution, hull attitude, and so on. The waterjet reduces the pressure on the hull surface near the stern and makes the height of the wave near the stern lower. This leads to a more violent change in hull attitude and the thrust deduction is positive, ranging from 0.1 to 0.2. The energy conversion is analyzed based on the ITTC recommended procedures, which shows the overall efficiency of the waterjet behind the hull is about 0.75~0.8 times the free stream efficiency.

Keywords

• URANS
• waterjet
• catamaran
• waterjet–hull interaction
• body force model