Earthquake Science (Oct 2024)

A new calibration method for radon detector in seismic systems[Key points]

  • Hongwei Ren,
  • Yaowei Liu

Journal volume & issue
Vol. 37, no. 5
pp. 445 – 458

Abstract

Read online

Radon observation is an important measurement item of seismic precursor network observation. The radon detector calibration is a key technical link for ensuring radon observation accuracy. At present, the radon detector calibration in seismic systems in China is faced with a series of bottleneck problems, such as aging and scrap, acquisition difficulties, high supervision costs, and transportation limitations of radon sources. As a result, a large number of radon detectors cannot be accurately calibrated regularly, seriously affecting the accuracy and reliability of radon observation data in China. To solve this problem, a new calibration method for radon detectors was established. The advantage of this method is that the dangerous radioactive substance, i.e., the radon source, can be avoided, but only “standard instruments” and water samples with certain dissolved radon concentrations can be used to realize radon detector calibration. This method avoids the risk of radioactive leakage and solves the current widespread difficulties and bottleneck of radon detector calibration in seismic systems in China. The comparison experiment with the traditional calibration method shows that the error of the calibration coefficient obtained by the new method is less than 5% compared with that by the traditional method, which meets the requirements of seismic observation systems, confirming the reliability of the new method. This new method can completely replace the traditional calibration method of using a radon source in seismic systems.

Keywords