Pilot-Scale Selective Electrodialysis for the Separation of Chloride and Sulphate from High-Salinity Wastewater

Abstract

The separation of chloride and sulphate is important for the treatment of high salt wastewater, and monovalent selective electrodialysis (MSED) has advantages in terms of energy consumption and pre-treatment costs compared to nanofiltration salt separation. Most of the research on monovalent anion-selective membranes (MASM) is still on a laboratory scale due to the preparation process, cost, and other reasons. In this study, a low-cost, easy-to-operate modification scheme was used to prepare MASM, which was applied to assemble a pilot-scale electrodialysis device to treat reverse osmosis concentrated water with a salt content of 4% to 5%. The results indicate that the optimum operating conditions for the device are: 250 L/h influent flow rate for the concentration and dilute compartments, 350 L/h influent flow rate for the electrode compartment and a constant voltage of 20 V. The separation effect of the pilot electrodialysis plant at optimal operating conditions was: the Cl− and SO42− transmission rates of 80% and 2.54% respectively, the separation efficiency (S) of 93.85% and the Energy consumption per unit of NaCl (ENaCl) of 0.344 kWh/kg. The analysis of the variation of the three parameters of selective separation performance during electrodialysis indicates that the separation efficiency (S) is a suitable parameter for measuring the selective separation performance of the device compared to the monovalent selectivity coefficient (PSO42−Cl−).

Keywords

• high-salinity wastewater
• monovalent selective electrodialysis
• pilot-scale device
• chloride and sulphate separation