Effects of geometrical and processing parameters on mechanical properties of auxetic polyurethane foams

Navid H. Z. Abedini; Amir Nourani; Mahdi Mohseni; Nesa Hosseini; Sepideh Norouzi; Parsa Riazi Bakhshayesh

doi:10.1007/s42452-022-05042-8

SN Applied Sciences (May 2022)

Effects of geometrical and processing parameters on mechanical properties of auxetic polyurethane foams

Navid H. Z. Abedini,
Amir Nourani,
Mahdi Mohseni,
Nesa Hosseini,
Sepideh Norouzi,
Parsa Riazi Bakhshayesh

Affiliations

Navid H. Z. Abedini: Department of Mechanical Engineering, Sharif University of Technology
Amir Nourani: Department of Mechanical Engineering, Sharif University of Technology
Mahdi Mohseni: Department of Mechanical Engineering, Sharif University of Technology
Nesa Hosseini: Department of Mechanical Engineering, Sharif University of Technology
Sepideh Norouzi: Department of Mechanical Engineering, Sharif University of Technology
Parsa Riazi Bakhshayesh: Department of Mechanical Engineering, Sharif University of Technology

DOI: https://doi.org/10.1007/s42452-022-05042-8
Journal volume & issue: Vol. 4, no. 6
pp. 1 – 16

Abstract

Read online

Article highlights The thermo-mechanical procedure was used to manufacture auxetic foams. Effect of processing parameters on the foam mechanical properties was investigated. Foams Poisson’s ratio and Young’s modulus were measured in two strain values.

Published in SN Applied Sciences

ISSN: 2523-3963 (Print); 2523-3971 (Online)
Publisher: Springer
Country of publisher: Switzerland
LCC subjects: Science; Technology
Website: https://www.springer.com/snas

About the journal

Abstract

Keywords