Polymers (Jul 2024)

Study on the Aging Characteristics of a ±500 kV Composite Dead-End Insulator in Longtime Service

  • Zhijin Zhang,
  • Bingbing Wang,
  • Xuze Li,
  • Shude Jing,
  • Yuan Gao,
  • Dong Zeng,
  • Xingliang Jiang

DOI
https://doi.org/10.3390/polym16131944
Journal volume & issue
Vol. 16, no. 13
p. 1944

Abstract

Read online

Composite insulators have been widely used in power grids due to their excellent electrical-external-insulation performance. Long-term operation at high voltage levels accelerates the aging of composite insulators; however, there is a scarcity of research on aged composite insulators operating at 500 kV for over ten years. In this paper, the mechanical, electrical, and microscopic properties were tested on different sheds along a 500 kV composite insulator that had been running for 18 years. Additionally, the results were compared with a new insulator and the standards for live insulator operation. The results showed that the aging of the high-voltage end of composite insulators was the most serious. The results of the physical properties test indicated that the insulator’s hardness was compliant but its tensile strength and break elongation did not meet standards. Under wet conditions, the pollution flashover voltage decreases by about 50% compared to the new insulator. Combined with the microscopic test results, the shed skeleton structure could be damaged and the filler might be lost during the aging process of polydimethylsiloxane (PDMS). The hardness of the insulator would increase by the precipitation of inorganic silicon; however, inorganic silicon might destroy the hydrophobicity and other properties of insulator sheds. These results can provide theoretical references for insulator life prediction and operation protection.

Keywords