Multi-objective design of fractional frequency-load control for hydro-thermal system considering nonlinear models and uncertainty

Abstract

One of the crucial quantities in the power system problem is frequency, which should never exceed its nominal value. In normal conditions of load changes, the frequency is adjusted by automatic generation control. Still, in the face of special conditions, such as logging of the downstream network from the main network or a significant amount of generated power leaving the circuit, the power imbalance between generation and consumption causes a rapid frequency drop. In this case, the automatic generation control cannot stop the frequency drop, so the frequency tends toward instability. In this paper, to automatically produce a water-thermal system in two zones of discrete and continuous modes, the design of a fractional controller is discussed and investigated in different functional conditions and uncertainties. The proposed NSGA-II multi-objective method is used in this article to optimize each area’s load frequency control parameters for various goals. The ideal response for the entire network will be obtained by modifying these responses using a multi-factor method. This paper defines a multi-zone frequency load control based on time objective functions and eigenvalues. Based on the speed changes for the proposed algorithm and the novel approach function method employed in the control design. The simulation performed and analyzed in different working conditions with different comparative criteria has been discussed and investigated. Compared to more contemporary techniques, the simulation results show that the system’s performance is guaranteed. The main successes of the suggested method in comparison to earlier methods have been the reduction of overshoot, undershoot, and settling time.

Keywords

• Frequency Control
• Automatic Generation Control
• Fractional Controller
• Load Frequency Control
• NSGA-II Optimization
• Hydro-Thermal Power System