Synergistically homogeneous-heterogeneous Fenton catalysis of trace copper ion and g-C3N4 for degradation of organic pollutants

Abstract

Using the bulk g-C3N4 as a precursor, four g-C3N4 nanosheets were further prepared by ultrasonic, thermal, acid, and alkali exfoliation. The structures of these materials were characterized by various techniques such as X-ray powder diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, energy dispersive X-ray spectroscopy, transmission electron microscopy, and X-ray photoelectron spectroscopy. The synergistical Fenton catalysis of these materials with Cu2+ was evaluated by using rhodamine B as a simulated organic pollutant. The results showed that there existed a significant synergistical Fenton catalysis between Cu2+ and g-C3N4. This synergistic effect can be observed even when the concentration of Cu2+ was as low as 0.064 mg L−1. The properties of g-C3N4 strongly influenced the catalytic activity of the Cu2+/g-C3N4 system. The coexistent of Cu2+ and the alkali exfoliated g-C3N4 showed the best catalytic activity. Hydroxyl radicals as oxidizing species were confirmed in the Cu2+/g-C3N4 system by electron paramagnetic resonance spectra. The synergistic catalysis may be attributed to the easier reduction of Cu2+ adsorbed on the g-C3N4. This study provided an excellent Fenton catalytic system, and partly solved the rapid deactivation of heterogeneous Fenton catalysts caused by the leaching of metal ions. HIGHLIGHTS There exists a significant synergistical Fenton catalysis between trace Cu2+ and g-C3N4.; The Cu2+ concentration is lower than the maximum acceptable limit in drinking water.; This study partly solved the rapid deactivation caused by the leaching of metal ions.; This study reminds researchers to pay attention to the possible synergistic catalysis between leached ions and supports.;

Keywords

• advanced oxidation process
• copper
• heterogeneous fenton catalyst
• synergistical catalysis
• g-c3n4