Case Studies in Construction Materials (Jul 2024)
Understanding the filling effect of ice on the mechanical properties of calcium silicate hydrate gel
Abstract
Ice exhibits good mechanical performance at low temperatures, and when it replaces the weakest pores in cement-based materials, it can noticeably enhance the overall mechanical properties of the material. However, the specific micro-mechanisms that contribute to the improvement of tensile mechanical properties in gel pores at low temperatures are still not fully understood. Based on the results of molecular dynamics simulations, significant roles have been attributed to pore size and temperature in the mechanical performance of gel pores at low temperatures. A thorough investigation was conducted on the process of tensile failure in saturated gel pores, as well as the changes in bonding interactions between calcium silicate hydrate (CSH)-ice and the unfrozen water film (UWF) at different pore sizes and temperatures. The results indicate that increasing pore size and decreasing temperature can improve the mechanical properties of saturated gel pores. With the decrease in temperature, the mechanical properties of the three gel pore systems with heights of 100 Å, 68 Å, and 54 Å were significantly enhanced. Under an engineering strain rate of 8×10−4/ps, the tensile strength and elastic modulus of gel pores increased from 0.57 GPa and 17.81 GPa at 250 K, to 0.97 GPa and 20.87 GPa at 150 K, respectively. To explain this phenomenon, further studies were conducted on the radial distribution function and dynamic hydrogen bonding behavior. The critical contribution of the hydrogen bond network to the mechanical performance of gel pores was discovered. The hydrogen bond structure which experienced the earliest damage, was investigated. As the strain increased, the hydrogen bonds continuously broke and reformed. This research provides a theoretical understanding of the mechanical properties of gel pores under low-temperature conditions.
