Natural Gas Industry B (Dec 2020)
Mechanism of wellbore instability in continental shale gas horizontal sections and its water-based drilling fluid countermeasures
Abstract
The wellbore instability in the horizontal sections of continental shale gas wells in the Ordos Basin is a major engineering and technical problem that restricts the exploration and development of the shale gas resources in the Yanchang Formation of Upper Triassic of Mesozoic in the Yanchang Block. To solve this problem, this paper analyzed the characteristics of mineral components in shale by means of X-ray diffraction. In addition, its physical and chemical characteristics, specific surface area and microstructure were analyzed. On this basis, a shale water-based drilling fluid system (PSW-2) of low free water activity based on nano plugging was developed. And it was applied on site at five horizontal wells in continental shale gas reservoirs to ensure the wellbore stability of their long horizontal sections. And the following research results were obtained. First, the Yanchang Formation shale in this area has a high content of clay mineral, and it is a fractured formation of weak expansion, easy dispersion and multiple bedding, so the wellbore instability here is the result of the comprehensive action of mechanical factors, physical and chemical factors, drilling mechanical disturbance, etc. Second, the shale has average pore diameter is 4.494–8.502 nm and is characterized by obvious capillary action, strong water absorption capacity and uneven hydration, which result in the decrease of local shale strength, so sudden collapse tends to happen easily. Third, the API loss of PSW-2 system is less than 2.8 mL, the rolling recovery rate is 95.15% (close to the recovery rate of oil-based drilling fluid 98.25%), the linear expansion rate is as low as 1.38%, and the wetting angle increases from 26° of dry rock samples to 56.5°. Fourth, the compressive strength of the system after immersion increases to 95.806 MPa, which is close to the original rock strength (110.70 MPa). It is concluded that this water-based drilling fluid system can effectively ensure wellbore stability by blocking the pores of shale with micro nano components, reducing the activity of liquid phase to increase the inhibition, and weakening the multi-element collaboration of the capillary imbibition effect of shale.
